Pianos made by: Young Chang Co., Ltd., Incheon, South Korea; and Tianjin, China

In 1956, three brothers — Jai-Young, Jai-Chang, and Jai-Sup Kim — founded Young Chang and began selling Yamaha pianos in Korea under an agreement with that Japanese firm. Korea was recovering from a devastating war, and only the wealthy could afford pianos. But the prospects were bright for economic development, and as a symbol of cultural refinement the piano was much coveted. In 1962 the brothers incorporated as Young Chang Akki Co., Ltd.

In 1964 Yamaha and Young Chang entered into an agreement in which Yamaha helped Young Chang set up a full-fledged manufacturing operation. Yamaha shipped partially completed pianos from Japan to the Young Chang factory in Incheon, South Korea, where Young Chang would perform final assembly work such as cabinet assembly, stringing, and action installation. This arrangement reduced high import duties. As time went by, Young Chang built more of the components, to the point where they were making virtually the entire piano. In 1975 the arrangement ended when Young Chang decided to expand domestically and internationally under its own brand name, thus becoming a competitor. Young Chang began exporting to the U.S. in the late 1970s, and established a North American distribution office in California in 1984. In addition to making pianos under its own name, Young Chang also made pianos for a time for Baldwin under the Wurlitzer name, for Samsung under the Weber name, and private-label names for large dealer chains and distributors worldwide.

Weber & Co. was established in 1852 by Albert Weber, a German immigrant, and was one of the most prominent and highly respected American piano brands of the late 19th and early 20th centuries. During the consolidation of the American piano industry in the early 20th century, Weber became part of the Aeolian family of brands. Following Aeolian’s demise in 1985, Young Chang acquired the Weber name.

In 1995, in response to rising Korean wages and to supply a growing Chinese domestic market, Young Chang built a 750,000-square-foot factory in Tianjin, China, and gradually began to move manufacturing operations there for some of its models. Today, the Tianjin facility produces Young Chang and Weber pianos, and components for the Albert Weber line, which is assembled in South Korea.

Hyundai Development Company, a Korean civil-engineering and construction firm, acquired Young Chang in 2006. The company says that Hyundai Development has brought the necessary capital for factory renovations and has instituted new advanced industrial quality-control systems.

In 2008 Young Chang hired noted American piano designer Delwin D. Fandrich to undertake a redesign of the entire Young Chang and Weber piano line. Highlights include extensively redesigned cast-iron plates, new string scales, and new rib designs. New directly-coupled bass bridges, along with unique “floating soundboard” configurations, improve soundboard mobility around the bass bridge for better bass tonal response. At the same time, a revised hammer-making process, in which the hammers are cold-pressed with less felt compression, provides for greater hammer resilience and improved tone, with less voicing required. Fandrich says that all of these features and processes contribute to his goal of building instruments with improved tonal balance and musicality, and provide opportunities to standardize manufacturing processes for better quality control. The new designs were phased in gradually from 2011 to 2013.

Along with being redesigned by Delwin Fandrich, former multiple piano lines were consolidated into just three lines: the Young Chang (Y) and Weber (W) series are entry- and mid-level instruments made in China, and the Albert Weber (AW) line comprises upper-level models made in Korea. The AW grands have lower-tension scales, maple rims, and Renner actions, and higher-quality hammer felt, soundboard material, and veneers (on wood-veneered models). The Y and W grands have lauan rims and Young Chang actions. The AW verticals use slightly better materials than the other verticals for the cabinets, hardware, music wire, and keys, though in general the differences are smaller than with the grands.

The Young Chang and Weber pianos distinctly differ from one another: the Weber models have a low-tension scale and softer, cold-pressed hammers, and the greater warmth and romantic tonal characteristics that often accompany that type of scale; the Young Chang models have a higher-tension scale and firmer cold-pressed hammers, and the greater brightness and stronger projection of a more modern sound. The Weber line, also known as the Premium Edition, also has agraffes in the bass section of the verticals, and beveled lids on the grands.

Quality control in Young Chang’s Korean factory has improved little by little over the years, and is now nearly as good as that in Japan. Most of the problems currently encountered are minor ones that can be cured by a good dealer make-ready and a little follow-up service, and the pianos hold up well in the field, even in institutions. The Albert Weber pianos, in particular, have great musical potential and respond well to expert voicing. Pianos from the factory in China, like other pianos from that country, have been uneven in quality, but in recent years have greatly improved. Young Chang says that Hyundai Development Group has upgraded the factories in both countries, and that the pianos made at the Tianjin factory are now on a par with those made in Korea.

Young Chang also owns Kurzweil Music Systems, a manufacturer of professional keyboards and home digital pianos, which it acquired in 1990.

Warranty: Young Chang and Weber — 10 years, parts and labor, to the original purchaser; Albert Weber — 15 years, parts and labor, transferable to future owners during the warranty period, plus a lifetime warranty on parts to the original owner.